I Need Help!!

ok well i am using a Datel Tansfer Kit and a 64 mb memory card. i cant do gamesaves all that well. i dont understand it because the way Losthope explains it is for a harddrive and i dont have a partion 3, i only have 0 and 1. can anyone explain how i can do this with a memory card. i keep getting corrupt data but the guy that made this says its 100% working fine. and i cant do games saves for anything. please someone help me! PICTURES WOULD HELP!

I have the same problem no matter if I drop a profile or a gamesave on my MU it comes up as corrupted even after following the tutorial


Mookdog

Originally Posted by MattttG3

ok well i am using a Datel Tansfer Kit and a 64 mb memory card. i cant do gamesaves all that well. i dont understand it because the way Losthope explains it is for a harddrive and i dont have a partion 3, i only have 0 and 1. can anyone explain how i can do this with a memory card. i keep getting corrupt data but the guy that made this says its 100% working fine. and i cant do games saves for anything. please someone help me! PICTURES WOULD HELP!

Ok first of all relax a little bit.

1) When you have you MU inside your computer and you open up Xplorer360 beta 6 all you are going to see is partition 0 and partition 1. The people who have partition 3 is the people that are transferring saves through harddrives not MU's, recap the MU only has partition 0 and 1 while the harddrive has 0 1 2 3

2) Your going to be putting saves/profiles in the partition 1 section in the MU under the content folder (helps if you already have a profile on the MU. http://forums.maxconsole.net/showthread.php?t=77044

3) The only known saves that I have seen to be working are CoD3 Multiplayer, Virtua Fighter 5, Warriors Orichi, and Bioshock. Most of the saves have been corrupted because of the last update.

yea well i think its just pure luck that i got the Assassins Creed one to work and the COD3 one. but thats all i have done. i am TRYING to do the NFSMS and Bioshock but i just dont understand anything. haha. i am new to this though. i am hoping losthope or liams or psp can help casue they seem to help the most.

Originally Posted by mastarifla

Ok first of all relax a little bit.

1) When you have you MU inside your computer and you open up Xplorer360 beta 6 all you are going to see is partition 0 and partition 1. The people who have partition 3 is the people that are transferring saves through harddrives not MU's, recap the MU only has partition 0 and 1 while the harddrive has 0 1 2 3

2) Your going to be putting saves/profiles in the partition 1 section in the MU under the content folder (helps if you already have a profile on the MU. http://forums.maxconsole.net/showthread.php?t=77044

3) The only known saves that I have seen to be working are CoD3 Multiplayer, Virtua Fighter 5, Warriors Orichi, and Bioshock. Most of the saves have been corrupted because of the last update.

ok i have all that so far. just that link you give has no pictures and as i said, i am new to this so i odnt know what it should look like. there is 5 lines to pick from under the 000000000000 line and i dont know which one to put it in, or to make it a whole new line.

Originally Posted by MattttG3

ok i have all that so far. just that link you give has no pictures and as i said, i am new to this so i odnt know what it should look like. there is 5 lines to pick from under the 000000000000 line and i dont know which one to put it in, or to make it a whole new line.

You dont need to edit anything in the MU, all you need to do is put the profile in the content folder with the rest of the E0000***********, those are considered the profiles on the memory card.

You can also put everything from you MU onto your hard drive and wipe the MU so it comes up clear in Xplorer360, makes it alot easier to figure out which is your profile.

Once you open your profile you will see a few folders, for example I have 4D5307D1 which I think is Call of Duty 3, what you are going to do is go all the way into a game folder untill you cant open any more folders, this is where the save will go.

Originally Posted by mastarifla

You dont need to edit anything in the MU, all you need to do is put the profile in the content folder with the rest of the E0000***********, those are considered the profiles on the memory card.

You can also put everything from you MU onto your hard drive and wipe the MU so it comes up clear in Xplorer360, makes it alot easier to figure out which is your profile.

Once you open your profile you will see a few folders, for example I have 4D5307D1 which I think is Call of Duty 3, what you are going to do is go all the way into a game folder untill you cant open any more folders, this is where the save will go.

wow. that might just work haha. thnaks for the good explanation. i will asnwer back to see if it worked for me