xbox won't boot (no video/audio)

[leetass]

If anyone can provide me with some insight on this problem, it would be greatly appreciated. I was playing around with PBL and loaded up a debug bios without the XDK and support files on the xbox itself. Now the xbox seems to boot, but there's no video nor audio nor FTP. I was thinking it might have set my xbox for PAL mode, but it doesn't seem to be the problem as the enigmah video mode selector doesn't do the trick.

Has anyone encountered this problem or know of a way to possibly fix it?

Thanks....

[AlcoholFuelled]

Which methos of install did you use to install the PBL in the first place?

If it was using 007:Auf then yo ushould just be able to use the same method to FTP in and fix it up (original games boot before EvoX loads).

Also when you say no FTP what do the system utilities say under IP? Is it blank or is it just different?

[leetass]

I used the 007auf method to launch PBL. I don't get any video or audio and I cannot FTP in to my xbox. There's no way for me to access my settings as I can't see anything on my screen. There is no way for me to access anything on this xbox right now. I can't launch originals or the video selector or anything.

[AlcoholFuelled]

Ok give some more specific details as to exactly WHAT you have done so far AND what files you have used. Also are you able to boot original games?

[cross]

I think I'm having the same problem... I originally had evoX 6, then *tried* to upgrade to evoX8 that was off the auto-installer disc v3, and then it booted but wouldn't read from the DVD drive. So then i tried going back to EvoX 6 and now it powers on but no loading screen. Just my VCR's NO SIGNAL screen. However, when I press the eject button, it says "your xbox requires service", but it's always done that. Now I can't load any games or ftp into it.