Anyone have an XCM case to sell?

[Samus]

I'm looking for a clear "whole" XCM case, like this one:

http://www.teamxtender.com/gc/CLEAR.jpg

I can't seem to find a vendor that has any of these cases in stock.

I've got Paypal, or I also have an Asus K8V SE Deluxe socket 754 motherboard that I'm not using that I'll trade straight up for it.

[Xboxmodder999]

http://www.divineo.cn/cgi-bin/div-cn/gc-vfcc

It's the chinese site, but they get all the stuff before their other sites, and shipping takes less then a week to get anywhere in the world.

EDIT: They also have the blue, red, and black crystal full cases too.

[Samus]

Thank you!! :D

I didn't think to check Divineo's chinese site...I'll remember that from now on!

[Xboxmodder999]

No problem :)

Yeah, their chinese site gets everything before the other sites do(since almost everything is manufactured in china), so thats a good place to check first.

I think I'm going to get one of these after looking at them. They look great, and they are about $13 cheaper, and they are good qaulity from the reviews I've read.

[lenselijer]

where can i read reviews about the full xcm cases?

I read the review about the icedcube by brakken, but i was very disappointed to read about the bad quality.

i'm also thinking about buying one of these xcm cases, but are they also going to be available in orange?

[Xboxmodder999]

where can i read reviews about the full xcm cases?

I read the review about the icedcube by brakken, but i was very disappointed to read about the bad quality.

i'm also thinking about buying one of these xcm cases, but are they also going to be available in orange?

There isn't a review on the fullcase, but it's not really needed.

The buttom of the XCM case is almost an exact copy of the Xecuter(IcedCube) one, and there are no problems with that one, so I doubt there are any with this one.

And as for the top part of the case, It's the XCM replacement top v2.0, so just look for a review of that.

I decided that I am going to get one, so if you want to wait for that, I'll write a review on it, and post in on NGCDEV.

[lenselijer]

would be nice to read your review.

are the full-cases only in black, crystal and blue color?
Because i'm looking for an orange full-case.

[Morien]

And as for the top part of the case, It's the XCM replacement top v2.0, so just look for a review of that.

Version 2, is that just the solid colour (non-led) cases? Or have they fixed the lid opening issue? (slown it down)

Thanks

[Xboxmodder999]

Version 2, is that just the solid colour (non-led) cases? Or have they fixed the lid opening issue? (slown it down)

Thanks
Yes, I believe that they are making these tops from their version 2 molds(NON LEDS), that have the screw shaft fixed. As for the lid opening fast for not, I'm not sure. I'll be recieving one in a few days though, so I will be able to tell you then.

[Morien]

Cool. Thanks.
Hopefully I'll get the new top when I get around to ordering my chip.

Thanks a lot

[Xboxmodder999]

Ok, got the case today, and I am happy to say that the lid does not fly open like it did before :)

I'll have my review up in a couple of days.

[Samus]

I got my case the other day too, and put it all together last night.

It looks awesome and seems to be a pretty well made, solid case. I just have one problem with it - the screw holes are slightly too small. It's ridiculously hard to screw things back in and right now I basically have my 'Cube put together without anything tightened down. Any ideas on what I might be able to do?

[Xboxmodder999]

I got my case the other day too, and put it all together last night.

It looks awesome and seems to be a pretty well made, solid case. I just have one problem with it - the screw holes are slightly too small. It's ridiculously hard to screw things back in and right now I basically have my 'Cube put together without anything tightened down. Any ideas on what I might be able to do?

I didn't have that problem at all. Putting in the screws was slightly harder then with the original case, but that is because you are making the threads yourself, as you are put the screws in.

[lenselijer]

is your review ready? where can i read it?

[Xboxmodder999]

is your review ready? where can i read it?
Sorry, I've been extremely busy lately, and have not had time to write it.

Hopefully I can find time this week to write it...

[lenselijer]

ok, no problem. Too bad that divineo.cn only sells the viper cases and not the qoob ones :(

[lenselijer]

I just ordered at divineo.cn, only $27.95 for the case and $10.00 shipping. Arrived in 7 days in a nice bubble-wrap package.

Here are the pictures:

http://membres.lycos.fr/lenselijer/xcmcube1.jpg

http://membres.lycos.fr/lenselijer/xcmcube2.jpg

http://membres.lycos.fr/lenselijer/xcmcube3.jpg

http://membres.lycos.fr/lenselijer/xcmcube4.jpg

http://membres.lycos.fr/lenselijer/xcmcube5.jpg

Installation was easy and the case fits perfect. I highly recommend this case!