PDA

View Full Version : Noob Q for mod and soldering modchip

sora8196
02-18-2008, 09:52 AM
what kind of wire can be used to solder and connect the pin together?
any wire? or any specific?
AceMilo
02-18-2008, 11:51 AM
30awg is my wire of choice.
SpankIt
02-18-2008, 12:00 PM
I use 30awg for the pins and 26AWG for the power and ground wires.
sora8196
02-19-2008, 07:32 AM
is there anything to take note before soldering? i heard there r cases with broken leg... in wat situation will cause broken leg? will the leg get risk of melting due to overheating from the soldering? sorry kinda noob. need enlighten here..
redsquirrell
02-19-2008, 08:10 AM
have a GOOD look at guides. find out what chipset your wii has. Its not worth the risk if your gonna mess things up.
SpankIt
02-19-2008, 06:40 PM
is there anything to take note before soldering? i heard there r cases with broken leg... in wat situation will cause broken leg? will the leg get risk of melting due to overheating from the soldering? sorry kinda noob. need enlighten here..


If you have never soldered before I would recommend doing ALOT of practicing before you attempt to install your Wii.Especialy if its a D2C. Just so that you don't risk breaking a perfectly good console.