My driver show "put xbox360 game" after flashed

[RYU81]

I flash my driver "TS-H943 M25" with SATA RAID VT6421 from xtreme 5.2 to iXtreme 1.2


iflash xxxxxxx xxxxx

after completed

every game for xbox & xbox360 (original & backup) show like video then say with many languages.

"to play this disc.put it an xbox 360 console"

Help me please.

P.S:I still have original firmware for my driver I backup it when I flash my driver with xtreme 5.2

[RYU81]

Edit:

Now I flash driver with original firmware



MTKFlash w /m /sata Backups/[7-digit serial]/[5-digit serial]/orig.bin

and it working again.I try to flash with iXtreme 1.2 after flashed still show when any game.

"to play this disc.put it an xbox 360 console"

[sbanting]

This could be a multiple amount of things,
one: the game thats your trying isn't fully stealth patched meaning the new firmware won't read it for safety.
two: a bad flash
three: poor quality burn
four: poor quality disks
five: poor quality burner

But as its happening to orginals too I'd say it sounds like a bad flash, so check the cables in the xbox make sure everything is in tight if it is get ixtreme firmware from somewhere else redownload it and reflash it and see if that works. Hope it helps, I have a similar problem tho I haven't worked out so i might reflash mine too, as what happens is that i put in a back up and it won't play it i take it out put it back in still nothing do it about 5 times and then it will work but the older back ups work first time, really odd and orginals work first time too.

[sneeky]

have you tried a original with ixtreme ???????
if it still says insert in xbox360 blah blah sounds like the dvd key
is the problem.

if originals boot on ixtreme then your backups are not made correctly.

[RYU81]

if that how to insert drive key into the hacked firmware?

[sneeky]

use firmware toolbox to insert your key

[RYU81]

I have firmware toolbox 4.5 but I don't how to used it.but I never used when I flash my driver first time with xtreme 5.2 fw and worked perfect.

[saleem]

youdont use fw toolbox to flash the drive when its samsung,you se that to put the key into xtreme fw,or just to see the key when you use it to open an orig.bin.

if you put your orig.bin in the folder that ixtreme 1.2 is you can use the make ixtreme app,just click on the .bat file and it will run a dos app and put the key and generate an ixtreme fw ready to flash over to the samsung.you can check the fw twith fw toolbox for the key and to make sure it is the same type as the drive you get example:ms25 core based for ms25.

also you can use the spoof feature for replacement drives.
:)

[RYU81]

is must do it to connect my driver with pc?I did it on windows and it say driver not match I don't know why.and I can't to open ix12.bin with toolbox fw and iprep

http://img341.imageshack.us/img341/1521/fffs006tn3.gif

[saleem]

just open the resulting ix12.bin with fw toolbox and check the key is present.as long as it is just flash it to the drive.
:)

[RYU81]

I can't open it with toolbox fw is say "run-time error'6': overflow" and iprep or xtremebootmaker is say not firmware

http://img147.imageshack.us/img147/7476/fffs007no3.gif

[RYU81]

any help??