Flash me version 7 console problem

[rmplp]

Dear all

Can someone help.

I have two consoles, one blue and one pink that I have flashed using superpass 2 and Supercard Lite with miscro SD with Flashme version 7. Both consoles have the same problem. Before i used to be able to close the console and pause the game, now when I close the consoles the pause does not work and sound continues and screens are still alight.
Also NEw Super Mario Bros, unable to access the mini games.

Any info would be greatly appreciated.

Thanks in advance

Rob

[Kakashi]

Your "pause" or sleep problem can be fixed by having a real NDS cart or dummy card or passcard inside the DS while playing. Or alternatively opening it up and soldering two pins.

Your mario problem is a weird one.

[MR_COW]

I belive the Mario problem is a SCL problem, not flashme.

Could you do the games before you flashed your DS?

[rmplp]

Hiya

All games were fine playing with the supercard and supercard lite which I just changed to. Also the console sleep mode was fine.
Then I flashed, should have stuck with the superkey I guess

Regards

Rob

[MR_COW]

Yep, probably just a flashmev7 bug. Hopefully V8(whenever it comes out) will fix that.

[rmplp]

Any idea of when it is coming out?

[rmplp]

Dear all

Reloaded the original firmware with noflash.nds then tried flashed both consoles with flashme steath v7 and then tried the other flashme v7 and with the superkey in I can go into sleep mode, which is exactly how my console worked before I flashed it and I still have to the superkey in it (wasnt a lot of point in me flashing it). Both versions of flashme fdo exactly the same thing, cannot access the health screen.

New Super Mario Bros minigames are still playing up.

Rob

[tester800]

Also NEw Super Mario Bros, unable to access the mini games.


I can't reproduce your bug ... i have a SCL and Flashmev7-NDSLite_version and can play those mini games as single player without any problems.

And otherwise (i didn't test it) it should be possible to play against with another person, because those flashme update allows undescripted DS-Downloads.

[rmplp]

I purchased these consoles from yesasia, one is a jap version and one is an asian version so I can even pin it down to a regional problem with a console.

WHat I have done is downloaded New Super Mario Bros again and loaded it to a clean micro sd card and mini games sem to work. Still have the sleep problem though without the superkey

Rob

[rmplp]

Sorry for the typos above. I purchased one console from yesasia and the other from Liksan. One is a jap version and the other is an asian version so this fault cannot be pinned down to a company or regional version of console

Rob

[gama]

You know that there is an edit button to edit your post, right?

[graveyrd]

rmplp: you realize that the sleep problem is not a "bug" with FlashMe but is in fact just the way that the NDS works.. Nintendo did not design the DS to be played without a NDS game in the game slot.. therefore it goes all weird and glitchy when you try to put it to sleep with FlashMe, since a couple of pins inside the DS that would normally be shorted out with a game in there, are not being shorted out with FlashMe.. When you had the superkey in the DS game slot, it was effectively shorting these pins, and enabling sleep to work..

As Kakashi posted earlier, to alleviate this problem, just make sure you have an original NDS game in your DS before turning it on to play a game off your Supercard Lite.. Alternatively, if you do not have any store bought games (Of course you should have original copies of all the roms that you are trying to play, right? :)), then you can either purchase a cheap game, or there is a product called a dummy card that you can purchase from a few online mod-chip stores.. If you don't want to do either of these methods, and you feel adventurous.. you can always try the methods described in this link (http://forums.maxconsole.net/showthread.php?t=23444) to solder a couple pins inside the DS so that you do not have to have an original game in the DS to have it sleep properly (This was also mentioned by Kakashi earlier)..

Please try to look a bit harder next time before posting a question like this, as typing 'sleep' into the maxconsole search under the FlashMe forum brings up a number of threads on the topic..

Sorry for the long post, hope this clears up the confusion you have regarding FlashMe and the sleep function of the NDS.

[rmplp]

Thanks for clearing this up for me. I was actually doing a search on pause instead of sleep:( but now I can underatnd what is wrong

Regards and thanks for everyones help and guidance.

Rob