XDK Help

[Thefunkyone]

I hope someone can answer this :o can i run a debug bios and XDK for making trainers and stuff on my bank 2 on my installed xecuter 2.6 mod chip and a normal evox dashboard on my bank 1?

or will they just conflict each other.

many thanks for your time ;)

[Thefunkyone]

Woooohooo done it :D now all i need to do is figure out how to use XDK Assist :rolleyes:

i found this great tutorial on how to setup a debug xbox.
hope it helps some peeps still trying ;)

[DJB]

Hehe, I love these flash tutorials, we end up making a few of them for various things. Here's a link to them if anyone is interested:
http://www.xbox-hq.com/html/modules.php?name=SWF_Tutorials

Back to the topic here, this URL is the manual form that was published in the AID manual, might be good for extra reference:

http://www.aideluxe.com/modules.php?name=Manuals&file=aid30-0f#chapter

[Thefunkyone]

Cheers DJB ;)

still cant figure it out tho :rolleyes:

gimme time and plenty of coffee and ill get there :D

[-pk-]

i found this great tutorial on how to setup a debug xbox.
hope it helps some peeps still trying ;)

That tutorial is pretty straight forward on the software side of things. And anyone wondering if you can put a debug bios on a modchip, you can but it must be a real debug bios with the debug rc4 (such as CPX 1.02), any regular bfm bios will not work on a modchip (and neither will a debug bios with DVD player support since they use the retail rc4 [such as CPX 1.03]); both will work with a bios loader app though (which is why most tutorials cover softmods).

Also, I should note that most debug bios's are a full 512kb, do not split a debug bios in to 256kb parts if you are unsure. If you use a freeware splitter on a 1mb bios make sure you cross check it with md5 checksums since all equally split parts should have the same md5. If you split a bios in to 256kb parts and each part has the same md5, then the bios is really 256kb and not 512kb :)

[Thefunkyone]

i put the yoshi 256k on mine. is that any good?

sorry for being a complete noob, but i am learning :D

[-pk-]

For debug use, as long as it boots up it should be fine. I only mentioned the CPX since v1.03 wont work on a modchip & v1.02 will, which is not very clear in the readme.

[Thefunkyone]

hairy muff ;)

I have the xecuter 2.x 512k bios with Evox dash on bank 1 and the yoshi 256k bios with XDK dash on bank 2.
They both load up sweet as, i can connect up with XDK assist but not with ETT or VS.net any idea why not? coz i am stumped :confused: