Help with lite on flashing

[dastar101]

I know there is a stickied topic about this but I hve a different, I have managed the extract the key and all that stuff and I have saved it but when I was erasing the drive, I accidentially closed down jungle flasher, I know this sounds extremely stupid but now when I try to do it again the lite on does not show up under drive properties instead it says A1 A1 A1 on all of the sections. Any help??

[prankster]

Do the erase and flash with dosflash from a bootdisk, if you had read the sticky you speak of, you would see someone has already posted a solution in there for your predicament if I recall correctly.
With dosflash16, you will not have a problem flashing the drive, in fact, the readme that accompanies the ixtreme v1.5 package covers this problem you speak of.
If it is partially erased do not panic, it is not bricked, as long as you have the keys etc, you are fine, back them up somewhere safe!

[dastar101]

Any tutorials on how to use dos flash?

[prankster]

Any tutorials on how to use dos flash?

See here : http://forums.maxconsole.net/showpost.php?p=1093509&postcount=1

Make your firmware 1st with the key.bin, identify.bin and inquiry.bin you already have, then proceed straight to the flashing task in the quick tute saleem wrote.
You will need to make a usb bootdisk and copy your hacked firmware to that along with dosflash16 (get from xbins) and boot from the disk to flash the drive.
Simple!

[dastar101]

Thanks for all your help prankster. I finally managed to flash it in dos flash and its running backups better than ever.:D