pictures of a DOL-101 installation? [Archive]

View Full Version : pictures of a DOL-101 installation?

lenselijer

11-30-2005, 09:22 AM

I just bought a white DOL-101 gamecube.

The problem is with the yellow and purple wire, they have to be soldered at the bottom of the motherboard. But how can i lead these wires out? And do i have to put some tape over them?

some pictures would be great.

lenselijer

11-30-2005, 11:13 AM

I think I have to modify the bottom metal plate a bit so the 2 wires can come out?

ozweepay

11-30-2005, 02:12 PM

I didn't modify mine, so you shouldn't have to. Just lead them out, and make sure they aren't being pinched anywhere.

reVx

11-30-2005, 02:40 PM

this guy has a good walk thru of a DOL-101. (http://webpages.charter.net/mbcrump/crumpsters_qoob_review/) nice pictures and all... hopefully this will help you.

lenselijer

11-30-2005, 05:37 PM

thank you, i understand now.

but my qoob sx dont want to work, as soon as i put the 2 wires through the hole i get no qoob screen, just a blank screen.

are the yellow and purple wire that important? can i only connect one, and if yes which one?

strells

11-30-2005, 07:27 PM

Uhh...every wire is important. You have to attach them all. And you shouldn't be putting the wires through a hole where a screw might go. Go around the circuit board like in the picture. Also, check to make sure that you bridged the two pins together for connection C (colored black).

Steve

lenselijer

12-01-2005, 08:45 AM

Can i leave the wires like in this picture?

http://webpages.charter.net/mbcrump/crumpsters_qoob_review/images/04-23-2005_021.jpg

or do i have to put tape over them just like with the dol-001?

Gcentrex

12-01-2005, 09:45 AM

Can i leave the wires like in this picture?

http://webpages.charter.net/mbcrump/crumpsters_qoob_review/images/04-23-2005_021.jpg

or do i have to put tape over them just like with the dol-001?

Always put tape onto exposed wires.